tel. +37167118449 

 

purchase@forcinox.com 

 

         

          

Other pipes

Spiral seam pipes

Spiral seam pipes

Spiral seam pipes are intended for the construction of oil and gas pipelines, oil pipelines for industrial heating systems and nuclear power plants.

Pipe certified by Gazprom

Pipe certified by Gazprom

For these pipes very strict requirements on the "machining" are used. Accordingly, the quality of the products supplied by us must meet the highest requirements of OJSC Gazprom. Products supplied by our company have quality passports.

OJSC JSC TRANSNEFT

Pipe certified by OJSC "JSC TRANSNEFT"

Pipes for main oil and product pipelines (OTT 23.040.00-KTN-051-11, OTT 23.040.00-KTN-050-11) must meet very strict requirements on the "machining", specification requirements and heat treatment of pipes. Accordingly, the quality of the products supplied by us must meet the highest requirements of JSC “Transneft”

 

PPU-PE

Polyurethane pipes in galvanized sheath (PPU-PE)

The main feature of insulated PPU-PE pipes is the low thermal conductivity level of 0,019-0,040 W/mK. At the moment, it is the lowest rate on the market, so the insulation of PPU pipelines retains heat better and almost does not react to changes in temperature. As a result, the heat loss is reduced from 30-35% (compared to conventional steel pipe) to 5.8%.

 

PPU-OTs

Polyurethane pipes in galvanized sheath (PPU-OTs)

PPU-OTs pipes are used for the above-ground laying of heating networks. Polyurethane pipes with steel protective shell fit into the flow channels, tunnels and underground and can be also used for hot and cold water supply networks

from 245 to 920 mm

Pipes with diameters from 245 to 920 mm

Production of hot-deformed pipes of diameters from 245 mm to 920 mm and wall thickness of 25 mm to 50 mm and a length of 4000 mm to 6000 mm by method of centrifugal forging of pipe billets.

 

Precision pipes

Precision pipes

Seamless precision pipescan be made hot-rolled or cold-rolled in dimension range of GOST 8732 and GOST 8734 from carbon and alloyed steel grades: 10, 20, 35, 45, 40H (Х), 30 HGSA (ХГСА) and others (in accordance with prior agreement). For cold-deformed pipes, a method of drawing mandrel (or in combination with rolling) is used.

Titanium pipes

Titanium pipes

Titanium pipes are widely used in the chemical, automotive, military, food, rocket and other industries. They are also used in drilling of wells, extraction of natural gas and oil. The widespread use of these pipes is due to their principal characteristics: they can withstand the maximum temperatures (up to 1668 ° C) and maximum load, they are not afraid of corrosion, they have a greater strength at density of 4.505 g/cm3.

 

Pipe of international standards, DIN pipes, ASTM pipes, pipes API